Model 6000 VEP-2 (A20) - Commercial Vertical Centrifugal Sump Pump
From Vertical Sump Centrifugal Pumps
Provide maintenance-free, completely drainable, MST strike tank transfer pumps (3) for nuclear waste clean-up application. Caustic waste solution (salt slurry) with 0.07% by weight solids, 1.3 SG, 95° F, 10-14 pH, Radioactive ambient*. Duty: 120 GPM @63ft. Total Head. *Top of tank (Affects Motor): Gamma Center of tank (Affects Pump): Alpha & Beta.
Commercial vertical centrifugal sump pump with sub...
Commercial vertical centrifugal sump pump with submerged product lubricated sleeve bearing (1) fabricated from SRS-specified materials
- Suction: 2-1/2' FF Flange (150#)
- Discharge: (1-1/2') 2' Non-fitted at the m.p. (23.75 x 31.38 x 3/4' Thick type 316 S/S)
Features
- Material of Construction: 316(L) S/S (Shaft: 2507 duplex S/S)
- Pre-formed graphoil packing rings (4) at the mounting plate
- Casing gasket: 321 Ag (Stainless Steel/ Silver)
- Impeller: Enclosed design, 11.75' diameter, with drain holes (2) at hub and no wipe-out vanes
- Motor: 10 hp, 1170 RPM, TEFC 256TC Reliance Electric with radiation resistant Class H/RH nuclear insulation
- Thrust bearing: shielded and packed for life with Exxon Unirex grease and protected by graphoil packing ring above and below
- Sleeve Bearing: Praxair Stellite 6B (on 2507 duplex S/S shaft) vs. Nitronic 60 with dual fluted I.D.
- Extension below mounting plate: 70.94' to suction flange
- Certified Hydro-static test (100 PSIG: Casing) and witnessed performance test
- Certified vibration analysis (<0.20 in/sec Peak Velocity at duty point measured at motor thrust bearing)
Customer reviews
No reviews were found for Model 6000 VEP-2 (A20) - Commercial Vertical Centrifugal Sump Pump. Be the first to review!