Refer Mild Steel Buttweld Tee, MS Pipe Elbow Dimensional Table.
Mild Steel Fittings are essentially mild carbon steel fittings. There are pipe fittings made up of low cs, high carbon steels and mild carbon steels. The different fittings such as the MS Pipe Elbow can be made in the mild carbon steels materials. The ms pipe fittings range from ½ inches to 12 inches in nominal bore sizes. The different fittings such as the MS Buttweld Tee also have different schedules ranging from sch10s through 80s. There are different functional types of fittings based on their functions.
Mild Steel Fittings
The Mild steel end cap is used to close the pipe which is a different case than all other fittings. The end cap can also come in different types for welding, bolting or screwed fitting. There are reducers that reduce the pipe diameters. The MS concentric reducer and eccentric reducers are in use but the concentric reducers are the most common ones in applications. There are special types such as the Mild steel stub end which has a short piece of pipe and a stub end which is connected to the pipe and welded together with the circumference of the pipe for maximum connectivity.
The MS eccentric reducer reduces the diameter along one side of the pipe, longitudinally. This is required in applications where the pipes are aligned against rigid surfaces like walls. The Mild steel weld elbows are used to change the direction of the pipe in different angles. There are long radius and short radius elbows depending on the bending radius of them. The welded as well as Mild steel threaded fittings are used in various applications. Almost all applications which involve piping also use pipe fittings. Please feel free to contact R.C. Metal Corporation for more information on different types of products such as the Mild steel socket weld fittings and the prices.
Check Mild steel end cap, Mild Steel pipe fittings Mechanical Behaviour, MS concentric reducer Chemical Structure.
Mild Steel Pipe Fittings Composition Chart
Chemicals
Content (%)
Manganese, Mn
2
Iron, Fe
Balance
Silicon, Si
1
Chromium, Cr
18-20
Carbon, C
0.03
Nickel, Ni
11-15
Sulfur, S
0.03
Molybdenum, Mo
3-4
Phosphorous, P
0.045
Dimension of Black Mild Steel Tee
NPS
(millimeter)
A
(millimeter)
D
(millimeter)
15
64
30
20
70
36
25
79
41
32
92
51
40
100
58
50
117
71
65
140
88
80
157
100
100
195
126
150
264
180
MS Concentric Reducer Mechanical Behaviour
Properties
Metric
Imperial
Poisson’s ratio
0.27-0.30
0.27-0.30
Tensile strength
595 MPa
86300 psi
Elongation at break (in 50 mm)
55%
55%
Yield strength
260 MPa
37700 psi
Modulus of elasticity
200 GPa
29000 ksi
Hardness, Rockwell B
85
85
Mild steel Socket Weld Fittings Standard Specifications
Specs
MS
Size Range
Seamless Butt-Weld Fitting: From 1/2″ - 10″
Welded ButtWeld Fitting: From 1/2″ - 48″