To connect 3/4" Pipe to 1-1/4" Fitting Adapter:
1. Insert a 3/4" Size PVC pipe segment into the 3/4" Pipe to 1-1/4" Fitting PVC Size Adapter.
2. Press or tap into place until the pipe is fully seated inside the adapter.
3. Insert the Adapter into the socket of a 1-1/4 in. Size PVC fitting.
4. Press or tap into place until fully seated inside of the 1-1/4” fitting.
Securing
While friction alone should keep the PVC Size Adapter in place, use PVC cement for a completely secure connection.
For additional information, please see our PVC Assembly Guide.
To connect 1/2" pipe to 1" Pipe Snap Adapter:
1. Insert a 1/2" Size PVC pipe segment into the smaller perpendicular port of the PVC Snap Adapter.
2. Press or tap into place. Secure with PVC cement if a permanent connection is desired.
3. Snap the Adapter onto the outer wall of a 1" Size PVC pipe.
4. Do not use PVC cement on the snap segment of Size Adapter, unless you wish for it to be connected permanently.
Securing
While friction alone should keep the 1/2" port of the PVC Size Adapter in place, use PVC cement for a completely secure connection.
For additional information, please see our PVC Assembly Guide.