HDPE Pipe being lifted by a crane

High Density Polyethylene (HDPE)

Custom HDPE Fittings

Characteristics of HDPE

HDPE is a durable, flexible plastic. The insoluble material is weather-resistant, shock-resistant, and abrasion-resistant. HDPE is also highly affordable, created from petroleum under high heat. Rather than crack, HDPE is more likely to tear under pressure, reducing overall damage. 100% BPA-free, HDPE is the favored material in the food industry. It is often selected for industrial work as it is 250% thicker than PVC. The material is also recyclable, producing useful if less sturdy plastic. The trickiest factor when working with HDPE is bonding, which requires intense heat and precision.

HDPE Uses

We create custom HDPE fittings for a variety of uses.

  • Potable water pipes
  • Food storage
  • Break-resistant mining equipment
  • Above-ground pipes
  • Sewer systems
  • Factory parts
  • Car parts
  • Fuel tanks
  • Commercial food containers

Specified Fittings provides custom HDPE pipe fittings to order. We also keep a variety of on-demand HDPE fittings in stock in Stevensville, MT, Early Branch, SC, and Longwood, FL.

Our current HDPE inventory:

Elbows
45° and 90° in DR7, DR9, DR11, and DR17

Tees
Line Tees in DR7, DR9, DR11, and DR17.
Reducing Tees in DR11, and DR17.

Reducers
Available in 1/2″ through 12″ in DR7, DR9, DR11, and DR17.

Flange Adapters
Available from 1” – 63” in all DRs.

Backing Rings
Available from 1” – 63” in Ductile Iron, Carbon Steel, Stainless Steel,
Epoxy Coated, Polypropylene, and Galvanized.

Mechanical Joint Adapters
Available in 2” – 24” with or without internal stiffener.

Mechanical Joint Accessory Kits
Available in 2” – 24” in either carbon steel or stainless steel.

Caps
Available in 2” – 8”, DR7, DR9, DR11, and DR17.

Electrofusion Fittings
We stock a complete line of Electrofusion Fittings.

Specifications:

3/4″ – 63″

DR’s 6.3/7/7.3/9/11/13.5/15.5/17/21/26/32.5

Fittings, Sweeps, Valves, Accessories

Short Form Specification

Fittings for HDPE pipe

All fittings for HDPE pipe meet or exceed the following specifications:

ASTM F714 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR), based on outside diameter.

ASTM D1248 Standard Specification for Polyethylene Plastic Molding and Extrusion.

ASTM D3350 Standard Specification for Polyethylene Plastic Pipe and Fittings Materials.

ASTM D3035 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR). Based on controlled outside diameter.

ASTM D3261 Standard Specification for Butt Heat Fusion PE Plastic Fittings for PE Plastic Pipe and Tubing.

ASTM F2206 **Available Upon Request** Standard Specification for Fabricated Fittings of Butt-fused Polyethylene PlasticPipe, Fittings, Sheet Stock Plate Stock or Block stock.

ASTM F2620 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings.

Some configurations, including lateral wyes, flanges and some others do not conform to this specification.

Fittings can be made/certified to AWWA C906 and/or FM Cl150/CL200 per request.

Specifications:

3/4″ – 63″

DR’s 6.3/7/7.3/9/11/13.5/15.5/17/21/26/32.5

Fittings, Sweeps, Valves, Accessories

Short Form Specifications

Fittings for HDPE pipe

All fittings for HDPE pipe meet or exceed the following specifications:

ASTM F714 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR), based on outside diameter.

D3350 Standard Specification for Polyethylene Plastic Pipe and Fittings Materials. ASTM D3035 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR). Based on controlled outside diameter.

Fittings can be made to AWWA C906 per request.

Specifications

3/4″ – 63″

DR’s 6.3/7/7.3/9/11/13.5/15.5/17/21/26/32.5

Fittings Sweeps Valves Accessories

Short Form Specifications

Fittings for HDPE pipe

All fittings for HDPE pipe meet or exceed the following specifications:

ASTM F714 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR), based on outside diameter.

ASTM D3350 Standard Specification for Polyethylene Plastic Pipe and Fittings Materials.

ASTM D3035 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR). Based on controlled outside diameter.

D3261 Standard Specification for Butt Heat Fusion PE Plastic Fittings for PE Plastic Pipe and Tubing

Some configurations, including lateral wyes, flanges and some others do not conform to this specification.

Fittings can be made/certified to AWWA C906 and/or FM Cl150/CL200/CL250/CL267/CL335 per request.

Certifications, Drawings, Catalogs

Certifications


Drawings

FM IPS:

FM DIPS:

Catalogs

Need a submittal?

Our CAD Techs, are glad to assist you with any drawings you may need for your structures--standard or custom.