ELECTROFUSION

Integrity Fusion Products has been known for their impressive product line of Electrofusion fittings since their start in 2007. Now, the IntegriFuse Electrofusion line continues to grow to include even more innovative products than ever before!

Electrofusion of HDPE uses electrofusion fittings which have small copper wires imbedded within the interior of the fitting. Electric current is then run through those wires using an electrofusion processor (click our equipment page our industry-leading I Fuse 105 Electrofusion Processor) creating heat, and in turn melting the HDPE on the inside of the fitting and the outside of the pipe creating a homogenous bond and leak free joint.

All IntegriFuse Electrofusion fittings must be installed by a qualified and experienced technician.

Electrofusion Coupler

  • Improved technology eliminating the need for pre-heating procedures
  • Utilizes higher Amperage (105A) to create more heat, allowing the pipe to expand to help reduce any gaps between pipe and coupler
  • Higher amperage allows for larger gaps to start fusion process
  • Higher amperage also results in deeper melt penetration
  • Wider fusion zones for increased surface melt
  • Wider cold zones allowing for more flexibility in pipe stab depth
  • fittings created with traceability bar codes
  • All couplers through 54″ are injection molded (not fabricated out of pipe or billet as other brands)
  • Pop up melt indicators
  • Cooling time listed on coupler indicates when the fitting joint can be fully pressure tested, eliminating the need for guesswork
  • Backed by 30+ years of experience in designing, developing and producing electrofusion fittings & equipment with strict quality management standards
  • FM Approved
  • AWWA C906 NSF/ANSI 61

SDR 11 IPS Sizes 1″ to 48″

SDR 11 DIPS Sizes 4″ to 48″

SDR 11 CTS Sizes .5″ to .75″

SDR 7 IPS Sizes 2″ to 24″

SDR 17 IPS Sizes 22″ to 54″

SDR 26 IPS Sizes 28″ to 54″

Branch Saddles

Water – 200 PSI (ASTM) / 232 PSI (ISO) | Gas – 100 PSI @ 73° F Sustainable Maximum Operating Pressure

Designed for use on IPS SDR 11 to SDR 17 HDPE Pipe

Threaded Branch Saddles

Water – 200 PSI (ASTM) / 232 PSI (ISO) | @ 73° F Sustainable Maximum Operating Pressure

Designed for use on IPS SDR 11 to SDR 17 HDPE Pipe

Electrofusion 90° Elbow

Water – 200 PSI (ASTM) / 232 PSI (ISO) | Gas – 100 PSI @ 73° F Sustainable Maximum Operating Pressure

Suitable for use on IPS SDR 11 to SDR 17 HDPE Pipe

Electrofusion 45° Elbows

Water – 200 PSI (ASTM) / 232 PSI (ISO) | Gas – 100 PSI @ 73° F Sustainable Maximum Operating Pressure

Designed for use on IPS SDR 11 to SDR 17 HDPE Pipe

Electrofusion Equal Tee

Water – 200 PSI (ASTM) / 232 PSI (ISO) | Gas – 100 PSI @ 73° F Sustainable Maximum Operating Pressure

Designed for use on IPS SDR 11 to SDR 17 HDPE Pipe

Electrofusion Reducer

Water – 200 PSI (ASTM) / 232 PSI (ISO) | Gas – 100 PSI @ 73° F Sustainable Maximum Operating Pressure

Designed for use on IPS SDR 11 to SDR 17 HDPE Pipe Only

Flex Restraint

Size ranges: 6” IPS/DIPS – 10” IPS/DIPS fusible to SDR 9 – SDR 17

12” IPS/DIPS – 63” IPS fusible to SDR 9 to SDR 26

KNOW WHAT YOU ARE LOOKING FOR? CLICK REQUEST A QUOTE BUTTON TO GET STARTED

Copyright 2018 Integrity Fusion Products, Inc. | All Rights Reserved | 270 Parkade Court, Peachtree City, GA 30269 | P: 770 632 7530 | F: 770 632 7540 | Employment | Contact
Scroll to top