Vinidex manufactures and supplies a comprehensive range of product systems to suit a range of applications.
Vinidex offers world class piping systems and solutions. Focusing on global reach with national support Vinidex provides solutions to the following markets & applications.
Non-pressure sewer, drain, waste and vent pipe systems
Above ground plumbing and drainage in buildings
Below ground sewerage and drainage in buildings and infrastructure
PVC is completely immune to corrosion in normal sewerage and ground-water environments.
The ease of handling, installation and transport provide overall project savings.
The flexibility of PVC DWV pipes allow them to cope with soil movements, subsidence and expansive clays.
The very smooth bore and chemical resistance characteristics of PVC ensure no scale or built up corrosion, thus producing a high flow capacity.
Vinidex PVC may be cut and machined with simple tools, ready for jointing, anywhere on the pipe barrel.
PVC material is non-porous. Our well-made solvent cement joints and rubber ring joints are designed with high interfacial pressure and have excellent resistance to root penetration.
| SCJ: DN 40 – DN 300 RRJ: DN 100 – DN 300 |
| PVC-U Material Properties |
| Maximum continuous operating temperature is 60°C. For more information, please read our Technical Note on Temperature limitations for PVC-U DWV pipe. |
| Suitable for indoor, outdoor and below ground use. |
| Chemical Resistance |
Best Environmental Practice
Green Star
Vinidex DWV pipes and fittings are manufactured from BEP PVC and have an EPD registered with the Australasian EPD Programme. This allows constructors to claim credit points under the Green Building Council of Australia’s (GBCA) Green Star ratings tools and the Infrastructure Sustainability Council of Australia’s (ISCA) Infrastructure Sustainability rating scheme.
Environmental Product Declaration
Standards for DWV pipes and fittings
Vinidex DWV pipes and fittings are manufactured and tested in accordance with AS/NZS 1260 – PVC-U pipes and fittings for drain, waste and vent applications.
Standards for rubber rings and solvent cement
Rubber rings for jointing DWV pipes are manufactured in accordance with AS 1646 – Elastomeric seals for waterworks purposes. Assembled rubber ring joints are also subjected to a range of tests to verify the joint design and long-term performance.
Priming fluid and solvent cements supplied by Vinidex comply with AS/NZS 3879 – Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings.
Contact with drinking water
Vinidex DWV PVC-U pipes comply with the requirements of AS/NZS 4020 – Testing of products for use in contact with drinking water. This Standard specifies a series of type tests, which are carried out in order to demonstrate that the product does not have a detrimental effect on the quality of drinking water. It assesses the effect of the pipe on the taste, odour and appearance of water as well as the health aspects due to growth of microorganisms and leaching of toxic substances.
WSAA Appraisal
StandardsMark
Watermark
PVC SCJ Pressure and Non-Pressure Jointing Video
Quick Reference Installation Guide
Standards
Vinidex recommends that installation is in accordance with AS/NZS 3500.2 – Plumbing and Drainage and AS/NZS 2032 – Installation of PVC pipes systems.
Product Catalogue
| SCJ: DN 40 – DN 300 RRJ: DN 100 – DN 300 |
| PVC-U Material Properties |
| Maximum continuous operating temperature is 60°C. For more information, please read our Technical Note on Temperature limitations for PVC-U DWV pipe. |
| Suitable for indoor, outdoor and below ground use. |
| Chemical Resistance |
Best Environmental Practice
Green Star
Vinidex DWV pipes and fittings are manufactured from BEP PVC and have an EPD registered with the Australasian EPD Programme. This allows constructors to claim credit points under the Green Building Council of Australia’s (GBCA) Green Star ratings tools and the Infrastructure Sustainability Council of Australia’s (ISCA) Infrastructure Sustainability rating scheme.
Environmental Product Declaration
Standards for DWV pipes and fittings
Vinidex DWV pipes and fittings are manufactured and tested in accordance with AS/NZS 1260 – PVC-U pipes and fittings for drain, waste and vent applications.
Standards for rubber rings and solvent cement
Rubber rings for jointing DWV pipes are manufactured in accordance with AS 1646 – Elastomeric seals for waterworks purposes. Assembled rubber ring joints are also subjected to a range of tests to verify the joint design and long-term performance.
Priming fluid and solvent cements supplied by Vinidex comply with AS/NZS 3879 – Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings.
Contact with drinking water
Vinidex DWV PVC-U pipes comply with the requirements of AS/NZS 4020 – Testing of products for use in contact with drinking water. This Standard specifies a series of type tests, which are carried out in order to demonstrate that the product does not have a detrimental effect on the quality of drinking water. It assesses the effect of the pipe on the taste, odour and appearance of water as well as the health aspects due to growth of microorganisms and leaching of toxic substances.
WSAA Appraisal
StandardsMark
Watermark
PVC SCJ Pressure and Non-Pressure Jointing Video
Quick Reference Installation Guide
Standards
Vinidex recommends that installation is in accordance with AS/NZS 3500.2 – Plumbing and Drainage and AS/NZS 2032 – Installation of PVC pipes systems.
Product Catalogue