Definition of Pipe elbow

Materials

Abrasion resistant elobw

SHS-self-propagating ceramic composite steel pipe and fittings, the new generation of wearable and corrosion resistant engineering pipeline, belongs to "863" Hi-tech Plan products.

• Ceramic Lined Elbows
  • 22.5 degree ceramic lined elbow
    
  • 45 degree ceramic lined elbow
    
  • 90 degree ceramic lined elbow
• Ceramic Tile lined elbows
  
• Backpack wear-resistant ceramic lined elbow
  
• Rare Earth Wear Resistant alloy Elbow
  

It is the ideal wearable and corrosion resistant engineering pipeline, with wear resistance 15 times higher than common steel pipe, smooth inner surface, and favorable liquor resistance.

Carbon Steel Pipe Elbow Fittings

• All welded pipe fittings have bevelled end to allow for ease of welding.
• This bevel allows for full penetration weld in most cases.
• There are two types of bevels;
  Plain Bevel and Compound Bevel: according to the bevel of welding pipe fittings construction .
• ASME B16.28, Buttwelding Short Radius Elbows and Returns

Industrial Processes: Bending, squeezing, pressing, forging, machining and more ANSI/ASME B16.25, Buttwelding Ends
ANSI/ASME B16.25 Standard covers the preparation of butt welding ends of piping components to be joined into a piping system by welding.

Application of pipe elbows:

Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc.

ELL & ELLS

• A wing of a building at right angles to the main structure.
• A right-angled bend in a pipe or conduit; an elbow.

Elbows are design features as below

A 90 degree elbow is also called a “90 bend” or “90 ell”. It is a fitting which is bent in such a way to produce 90 degree change in the direction of flow in the pipe. It used to change the direction in piping and is also sometimes called a “quarter bend”.

A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. It is available in many materials like silicone, rubber compounds, galvanized steel, etc. The main application of an elbow (90 degree) is to connect hoses to valves, water pressure pumps, and deck drains. These elbows can be made from tough nylon material or NPT thread.

A 45 degree elbow is also called a “45 bend” or “45 ell”. It is commonly used in water supply facilities, food industrial pipeline networks, chemical industrial pipeline networks, electronic industrial pipeline networks, air conditioning facility pipeline, agriculture and garden production transporting system, pipeline network for solar energy facility, etc.