Aluminum Coil / Strip

The advantage properties of aluminum alloy are light weight, excellent electrical and thermal conductivity, high corrosion resistance and ductility.

Aluminum alloy is soft and usually alloyed with copper, zinc, magnesium, silicon, manganese and lithium to increase strength. When aluminum alloy is exposed to air, an anti-oxidant coating will be formed instantly to protect products. Aluminum alloy is one of the lightest metals. The application of products ranges from precision technology to daily commodities.

Mechanical Properties

  • Tensile Strength, Ultimate
  • 60 ~ 460 Mpa
  • Tensile Strength, Yield
  • 20 ~ 460 Mpa
  • Hardness, Brinell
  • 20 ~ 138

Product Specification and Size :

Standard Specification: GB/T 3880, ASTM B209, EN 485

Alloy and Temper
Alloy Temper
1xxx: 1050, 1050A, 1060, 1100 O, F, H12, H14, H16, H18, H22, H24, H26, H28
3xxx: 3003, 3004, 3104, 3005, 3105
5xxx: 5005, 5052, 5754, 5083, 5086, 5182, 5049, 5251, 5454 O, F, H22, H24, H26, H28, H32, H34, H36, H38

Alloy Designation (For Reference)

Comparison of Alloy Designations for Aluminum Products

Alloy Series Chinese Standard American Standard European Standard
1xxx Series 1050 - -
1050A - EN AW-1050A
1060 1060 -
1100 1100 -
3xxx Series 3003 3003 EN AW-3003
3004 3004 EN AW-3004
3005 3005 EN AW-3005
3105 3105 EN AW-3105
5xxx Series 5005 5005 EN AW-5005
5052 5052 EN AW-5052
5754 5754 EN AW-5754
5083 5083 EN AW-5083
5086 5086 EN AW-5086
5182 - EN AW-5182
5049 - EN AW-5049
5251 - EN AW-5251
5454 5454 EN AW-5454

Temper Designation (For Reference)

Temper Definition
F As fabricated (no mechanical property limits specified)
O Annealed
H12
H14
H16
H18
Strain Hardened, 1/4 Hard
Strain Hardened, 1/2 Hard
Strain Hardened, 3/4 Hard
Strain Hardened, Full Hard
H22
H24
H26
H28
Strain Hardened and Partially Annealed, 1/4 Hard
Strain Hardened and Partially Annealed, 1/2 Hard
Strain Hardened and Partially Annealed, 3/4 Hard
Strain Hardened and Partially Annealed, Full Hard
H32
H34
H36
H38
Strain Hardened and Stabilized, 1/4 Hard
Strain Hardened and Stabilized, 1/2 Hard
Strain Hardened and Stabilized, 3/4 Hard
Strain Hardened and Stabilized, Full Hard

Available Size Range

Dimension Range
Thickness 0.2 ~ 6.0 mm
Width 600 ~ 2,600 mm

* The thickness can be up to 10mm for coil stock (mother coil for cold rolling).
- Standard Width and Length: 1000mm, 1250mm, 1500mm, 1219mm, 1524mm
- Surface Finish: Mill finish, unless otherwise specified
- Surface Protection:
Without paper interleaved for all aluminum coils
With PE/PVC filming on main side (if specified)
- Coil ID
405mm, 505mm, 605mm
- Minimum Order Quantity
5MT per size, total 20MT for one order

Application

Aluminum strip and coil are common materials with many advantages. Aluminum strip and coil have good forming performance and corrosion resistance, used in the transportation, automobile, shipbuilding, instrument, electrical enclosure, etc.

Type Application
Food Packaging Beverage can end, can tap, cap stock, etc.
Construction Curtain walls, cladding, ceiling, heat insulation and venetian blind block, etc.
Transportation Automobile parts, bus bodies, aviation and shipbuilding and air cargo containers, etc.
Electronic Appliance Electrical appliances, telecommunication equipment, PC board drilling guide sheets, lighting and heat radiating materials, etc.
Consumer Goods Parasols and umbrellas, cooking utensils, sports equipment, etc.
Other Military, color coated aluminum strip or coil

Chemical Composition (For Reference)

Chemical Composition conforms to Chinese, American and European standard specification

Alloy Si Fe Cu Mn Mg Cr Zn Ti Others:
Each
Others:
Total
Al: Min.
1050 0.25 0.40 0.05 0.05 0.05 - 0.05 0.03 0.03 - 99.50
1060 0.25 0.35 0.05 0.03 0.03 - 0.05 0.03 0.03 - 99.60
1100 0.95 Si + Fe 0.05~0.20 0.05 - - 0.10 - 0.05 0.15 99.0
3003 0.60 0.70 0.05~0.20 1.0~1.5 - - 0.10 - 0.05 0.15 remainder
3004 0.30 0.70 0.25 1.0~1.5 0.8~1.3 - 0.25 - 0.05 0.15 remainder
3005 0.60 0.70 0.30 1.0~1.5 0.2~0.6 0.10 0.25 0.10 0.05 0.15 remainder
5005 0.30 0.70 0.20 0.20 0.5~1.1 0.10 0.25 - 0.05 0.15 remainder
5052 0.25 0.40 0.10 0.10 2.2~2.8 0.15~0.35 0.10 - 0.05 0.15 remainder
5754 0.40 0.40 0.10 0.50 2.6~3.6 0.30 0.20 0.15 0.05 0.15 remainder
5083 0.40 0.40 0.10 0.4~1.0 4.0~4.9 0.05~0.25 0.25 0.15 0.05 0.15 remainder
aluminum coil