Braided Flexible Connectors

OVERVIEW:  Braided flexible connectors for piping equipment are an important part of a wide range of systems that require flexibility in fluid transfer. They are constructed from lengths of corrugated stainless steel braided metal hose to create the flexible pipe couplings.

Flexicraft makes quality metal hose in any length or fitting, up to 24" diameters. The braided connectors shown below are common length and fitting combinations that are kept in stock as flex connectors for pumps and other equipment. These flex connectors are competitively priced and are available for quick shipment.

For the simlar metal hoses that you can have fabricated in any length or fitting, see the SB1 and BB1.

  • Flexible Connectors stocked with 150# carbon steel flanges and stainless steel hose & braid in three standard lengths. From 2" to 14" diameters. All others fabricated as needed.

  • Flexible Connectors stocked with carbon steel MNPT thread ends and stainless steel hose & braid in two standard lengths. From 3/8" to 2-1/2" diameters. All others fabricated as needed.

  • Flexible Connectors stocked with copper sweat ends and stainless steel hose & braid from 1/2" to 3" diameters. All others fabricated as needed.

  • Flexible Connectors stocked carbon steel grooved ends and stainless steel hose & braid from 2" to 12" diameters. All others fabricated as needed.

  • Flexicraft provides a braided metal connector with CSA / AGA approval. Available in c/s weld or MNPT thread ends, from 1/2" to 4" diameters.

  • A bonded FDA silicone liner is embedded for a food grade sanitary, clean-in-place design. The flanged connectors range from 1-1/2" to 8" diameters.

  • A bonded FDA silicone liner and cover with an embedded stainless steel braid reinforcement makes up this food grade sanitary, clean-in-place design. The sanitary fittings come standard. From 1-1/2" to 4" diameters.