IntegriFuse Molded Butt Fusion Fittings include both everyday items you expect from a fittings manufacturer, as well as, some unique items that will solve many project and jobsite challenges.
Butt Fusion is defined by McGraw-Hill as “A method of joining plastic pipe, sheet, or other similar forms of a thermoplastic resin wherein the two ends to be joined are heated to the molten state and then rapidly pressed together to form a homogeneous bond.” With HDPE fittings you would use a butt fusion machine, heat both ends of the fittings or pipe and press them together to form a strong bond/fusion and eliminating all potential leaks and joints.
Below is a list of fittings with their size range and SDR listed.
All molded fittings are manufactured to be fully pressure rated to the equivalent SDR of HDPE pipe.
90° BENDS 
Molded 90° Elbows from Integrity Fusion Products are the new market leader for butt fusion elbows. These fittings offer performance, availability, and value that eliminate the need for fabricated fittings.
The molded difference includes:
- No inner fusion beads
- Fully Pressure Rated
- Wall thickness remains consistent throughout
SDR 17 IPS Sizes 2″ to 12″
SDR 11 IPS Sizes .75″ to 12″
SDR 9 IPS Sizes 2″ to 12″
SDR 7 IPS Sizes 2″ to 12″
SDR 11 DIPS Sizes 4″ to 12″
45° BENDS
Molded 45° Elbows from Integrity Fusion Products are the new market leader for butt fusion bends. These fittings offer performance, availability, and value that eliminate the need for fabricated fittings.
The molded difference includes:
- No inner fusion beads
- Fully Pressure Rated
- Wall thickness remains consistent throughout
SDR 17 IPS Sizes 2″ to 12″
SDR 11 IPS Sizes 2″ to 12″
SDR 9 IPS Sizes 2″ to 12″
SDR 7 IPS Sizes 2″ to 12″
SDR 11 DIPS Sizes 4″ to 12″
22.5° Bends
Molded 22.5° Bends are now available from Integrity Fusion Products. These fully pressure rated fittings are available in SDR 11 for 2″ to 8″ IPS sizes. This new solution will improve the quality and availability of fittings for your project and replace the fabricated fittings typically used. These fittings truly are “Molded for your Industry”.
The molded difference includes:
- No inner fusion beads
- Fully Pressure Rated
- Wall thickness remains consistent throughout
SDR 11 IPS Sizes 2″ to 8″
EQUAL TEES
Molded Equal Tees are now available from Integrity Fusion Products. These fully pressure rated fittings are available in a variety of sizes. This new solution will improve the quality and availability of fittings for your project and replace the fabricated fittings typically used. These fittings truly are “Molded for your Industry”.
SDR 17 IPS Sizes 2″ to 12″
SDR 11 IPS Sizes 2″ to 12″
SDR 9 IPS Sizes 2″ to 12″
SDR 7 IPS Sizes 2″ to 12″
SDR 11 DIPS Sizes 4″ to 12″
REDUCING TEES
Molded Reducing Tees are now available from Integrity Fusion Products. These fully pressure rated fittings are available in a variety of sizes. This new solution will improve the quality and availability of fittings for your project and replace the fabricated fittings typically used. These fittings truly are “Molded for your Industry”.
SDR 17 IPS Sizes 3×2″ to 12×10″
SDR 11 IPS Sizes 3×2″ to 12×10″
Lateral Wyes
Molded Lateral Wyes from Integrity Fusion Products are the new market leader for butt fusion wyes. These fittings offer performance, availability, and value that eliminate the need for fabricated fittings.
The molded difference includes:
- No inner fusion beads
- Fully Pressure Rated
- Wall thickness remains consistent throughout
SDR 17 IPS Sizes 2″ to 8″
SDR 11 IPS Sizes 2″ to 8″
Molded Crosses
Molded Equal Crosses are the newest injected molded fittings offered by Integrity Fusion Products. These innovative fittings are available in multiple SDRs to meet your project’s needs. Replace your fabricated fitting projects with products that are ‘Molded for your Industry’.
The molded difference includes:
- No inner fusion beads
- Fully Pressure Rated
- Wall thickness remains consistent throughout
SDR 17 IPS Sizes 2″ to 4″
SDR 11 IPS Sizes 2″ to 4″
SDR 9 IPS Sizes 2″ to 4″
REDUCERS
Molded Reducers from Integrity Fusion Products are the new market leader for butt fusion reducers. These fittings offer performance, availability, and value that eliminate the need for fabricated fittings.
The molded difference includes:
- No inner fusion beads
- Fully Pressure Rated
- Wall thickness remains consistent throughout
SDR 17 IPS Sizes 3″ x 2″ to 12″ x 10″
SDR 11 IPS Sizes 3″ x 2″ to 12″ x 10″
SDR 11 DIPS Sizes 6″ x 4″ to 8″ x 6″
CAPS
Molded Caps from Integrity Fusion Products are the new market leader for butt fusion caps. These fittings offer performance, availability, and value that eliminate the need for fabricated fittings.
The molded difference includes:
- No inner fusion beads
- Fully Pressure Rated
- Wall thickness remains consistent throughout
SDR 17 IPS Sizes 2″ to 12″
SDR 11 IPS Sizes 2″ to 12″