1/4" Malleable Guy Clip Allied H-885

• For 1/4" Strand
• A heavy duty means of securing down guys and wire rope.
  
• Comprised of a Malleable Iron base, “U” bolt, and two hex nuts.
  
• All components are hot dip galvanized to meet ASTM Specification A153.

5/16" Malleable Guy-Clip Allied H-886-

• For 5/16 Strand
• A heavy duty means of securing down guys and wire rope.
  
• Comprised of a Malleable Iron base, “U” bolt, and two hex nuts.
  
• All components are hot dip galvanized to meet ASTM Specification A153.

3/8" Malleable Guy-Clip Allied H-887

• for 3/8 strand
• A heavy duty means of securing down guys and wire rope.
  
• Comprised of a Malleable Iron base, “U” bolt, and two hex nuts.
  
• All components are hot dip galvanized to meet ASTM Specification A153.

3/8 THIMBLE OPEN Guy Strand J1057

Thimble, Wire Rope: Type - Guy Open Wire Rope; Strand Diameter - 3/8 in; Opening Width - 5/8 in; Eye Width - 7/8 in; Eye Length - 1 7/8 in; Material - Steel, Hot Dipped Galvanized; Weight - 8.80 lb/100.

THIMBLE OPEN 3/8 Guy Strand J1057

1/2 THIMBLE OPEN Guy Strand J1058

Thimble, Wire Rope: Type - Guy Open Wire Rope; Strand Diameter - 1/2 in; Opening Width - 3/4 in; Eye Width - 1 1/8 in; Eye Length - 2 in; Material - Steel, Hot Dipped Galvanized; Weight - 18.40 lb/100

THIMBLE OPEN 1/2 Guy Strand J1058

Crossover Clamp for 1/4" Strand H-4069

H-4069 Crossover Clamp for 1/4" Strand

• Used in aerial construction at the mid-span to clamp two 1/4" strands together perpendicularly
• Crossover plates are tapped to eliminate the handling of loose nuts
• Stamped from AISI 1008 Steel

Joslyn Guy Clamp 2-Bolt 3/16" - 5/16" H-J926

(Limited in stock)

H-J926 Joslyn Guy Clamp 2-Bolt 3/16" - 5/16"
Joslyn Guy Clamps are rolled from carbon steel with straight parallel grooves that will not damage guy strand. Offset guy clamps are designed to give increase holding strength. The clamping bolts have special shoulders to prevent turning when the nuts are tightened,
Specifications:

• Number of Bolts: 2
• Bolt Diameter: 1/2"
• Clamping Length: 3-1/4"
• Clamp Width: 1-9/16"
• For Strand Diameter: 3/16" - 5/16"

Guy Clamp One Bolt J1061

2 Bolt Guy Clamp 3-3/8Lng " with 1/2" Bolts J1030/ALL 5058

• Used to form guy loops that attach to anchor rods or dead-ends.
• Parallel grooves accept strand without marring.
• Plate halves align evenly for ease of installation.
• Plate length is 3-3/8" and plate width is 1-9/16".
• Strand sizes accommodated are 3/16" (2.2 M) -3/8" (10 M).
• Comprised of two plates and two 1/2" X 1-5/8" Carriage Bolts with Regular Square Nuts.
• Hot dip galvanized to meet ASTM Specification A153.
• H-J1030-ALL-5058
• This is not a suspension clamp

3 Bolt Clamp Marriage Guy Clamp 6" with 5/8" Bolts, 5/16" - 1/2" Strand Range H-J931

MSI H-J931 3 Bolt Marriage Guy Clamp 6", 5/16" - 1/2" Strand Range
3 Bolt Clamp Marriage Guy Clamp

Specifications/Features:

• Number of Bolts: 3
• Clamp Bolt Diameter: 5/8"
• Clamp Length: 6"
• Clamp Width: 1-21/32"
• Strand Diameter: 5/16" - 1/2"
• Rolled from carbon steel with straight parallel groove that will not damage strand
• The clamping bolts have special shoulders to prevent turning when the nuts are tightening
• Construct of high quality steel, hot-dip galvanized

Not to be used as a suspension clamp. Can also be used with the SideWalk Guy Clamp End J0522

3 Bolt Clamp Marriage Guy Clamp 4"with 1/2" Bolts, 3/16" - 7/16" Strand Range H-J929

MSI H-J929 3 Bolt Marriage Guy Clamp 4"with 1/2" Bolts, 3/16" - 7/16" Strand Range
3 Bolt Clamp Marriage Guy Clamp
Specifications/Features:

• Number of Bolts: 3
• Clamp Bolt Diameter: 1/2"
• Clamp Length: 4"
• Clamp Width: 1-9/16"
• Strand Diameter: 3/16" - 7/16"
• Rolled from carbon steel with straight parallel groove that will not damage strand
• The clamping bolts have special shoulders to prevent turning when the nuts are tightening
• Construct of high quality steel, hot-dip galvanized

Not to be used as a suspension clamp

3 Bolt Clamp Marriage Guy Clamp 6" with 1/2" Bolts, 3/16" - 7/16" Strand Range H-J930

Messenger Extension Bracket 12" SCB-12-5

Provides a 12 inch clearance from the pole and is fastened with two 5/8 inch mounting bolts. Clamp plates are reversible to accept a wide range of messenger diameters.

• Hot dip Glavanisex Ductile Iron