The face of the flange is either 1/16” or 1/4” depending on the pressure class. ANSI 300 and under have a 1/16” raised face and ANSI 400 and above have a 1/4” raised face. The mating face is machined to have shallow grooves in it to ensure a positive grip with the gasket. The
Raised face flanges are available in most types of flanges. Some of these are blind flanges, lap joint flanges, slip-on flanges, socket weld flanges, threaded flanges and weld neck flanges. All of the ANSI pressure classes are available with raised face flanges.
Gaskets for a raised face flange can be whatever is suited for the process. They can be spiral wound gasketsor non metallic gaskets. This is fully dependant on whatever is required by the process stream.
Raised Face Flange Design Considerations
As with all the other flange facings, it is important to ensure that the mating flange is compatible with whatever flange you are using. For example, flanges that are built to AWWA standards are different than flanges that are built to ASME B16.5, although they look similar.
When looking at flange tables, the dimension of the face is not always included in the dimensional data. Always be sure whether or not the length dimension is included. The dimensional data at Piping Designer does not include the dimension of the raised face.
Raised Face Gasket datasheets
Raised Face Flange Datasheets
The datasheets we have on this site are shown below. For simplicity sake, only datasheets that adhere to B16.5 are shown. ASME B16.5 covers flange dimensions from ½” to 24”. For sizes larger than this, please visit our flange datasheets page.